Opticon OPR 3001 - Manual (Page 21)

Opticon
OPR 3001
Specifications Manual
21
d) ACK/NAK
After data has been transmitted, the scanner expects to receive one of the
following responses from the host:
• ACK response—Action: The scanner completes transmission with the
good-read buzzer and returns to the initial state.
• NAC response—Action: The scanner sends the data again and waits for
the response from the host.
• DC1 response—Action: The scanner returns to waiting for the trigger, if it
has a trigger (the initial state).
• None response—Action: The scanner sounds the error buzzer and returns
to the initial state.
ACK/NAK timeout can be set as follows using the menu or commands.
ACK/NAK timeout Menu / Command
Indefinitely (default) XI4
100 ms XI5
500 ms XI6
1000 ms XI7
Figure 16: ACK/NAK