Onkyo DX-C390 - Manual (Page 13)

13
Connecting the DX-C390 —Continued
With (Remote Interactive) you can control the
DX-C390 together with your other -compatible
Onkyo AV components. With some Onkyo AV receivers
you can use one remote controller to control all your
Onkyo components and use the following special
functions:
■ Auto Power On
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you turn on the DX-C390, the
AV receiver will turn on and select the DX-C390 as the
input source.
■ Direct Change
If your DX-C390 is connected to an -compatible
Onkyo AV receiver, when you start playback on the
DX-C390, the AV receiver will select the DX-C390 as
the input source.
■ Auto Power Off
When you set any -compatible Onkyo AV compo-
nent to Standby, all other AV components connected via
enter Standby as well.
■
Dimmer
When you dim the display brightness on an -compat-
ible Onkyo AV component, the displays on all other AV
components connected via
are dimmed as well.
To use the functions, you need to connect one of the
DX-C390’s connectors to an connector on
another AV component in your system by using the sup-
plied
cable. An cable is supplied with each -
compatible Onkyo CD player, DVD player, and cassette
recorder.
See the manuals supplied with your other
-compati-
ble AV components for more information.
Notes:
• Use only cables for connections.
• To use you must make an analog RCA/phono
connection between your DX-C390 and Onkyo AV
receiver even if they are connected digitally.
• The DX-C390 has two connectors. You can con-
nect either one to your Onkyo AV receiver. The other
connector is for connecting additional
-compatible
components.
• Connect the DX-C390’s connector to only Onkyo
AV components. Connecting to other manufacturer’s
AV components may cause them to malfunction.
• Some Onkyo -compatible AV components may
not support the special functions described here.
Connections
RCA/phono audio connecting cable
cable
Hi-fi amp, AV receiver
CD
R L
To use you must make an analog audio connection (RCA/phono)
between the DX-C390 and your other Onkyo equipment even if they are
connected digitally.
Disconnect the power
cord before making any
connections!
Coaxial IN
Coaxial cable (not supplied)