Onkyo DV-SP303E - Manual (Page 14)

14
Front & Rear Panels—Continued
A OPTICAL DIGITAL AUDIO OUT [21] (not
North American and European models)
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
B COAXIAL DIGITAL AUDIO OUT [21]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C S VIDEO VIDEO OUT[20]
This connector can be used to connect a TV or pro-
jector with an S-Video input.
D COMPONENT VIDEO OUT [20]
These sockets output component video and can be
connected to an component video input on a TV or
projector.
E VIDEO OUT [18]
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
F ANALOG AUDIO OUT [18]
These RCA/phono connectors can be connected to
analog audio inputs on your TV, hi-fi amp, or AV
receiver.
G AV CONNECTOR [20] (European model only)
This SCART output can be connected to a TV or
projector with a SCART input by using the supplied
SCART cable. This SCART connector outputs 2-
channel stereo audio, composite video, S-Video,
and RGB video.
H AC INLET [22] (not North American model)
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
Rear Panel
1 2 3 4 8 6 5
2 3 4 8 7 6 5
2 3 4 6 5
DV-SP303 North American model
DV-SP303 Asian and Oceanian models
DV-SP303E European model