Omega Engineering OM88128 - Manual (Page 13)

10
To pan, press the keys and click on the left mouse
button over a point on the viewport. Then drag the mouse to
another point.
The graph viewport scrolls so that the original point now appears
under the new mouse cursor location. You can drag the mouse
anywhere on the screen, even beyond the viewport.
To restore the viewport to its original state after zooming or panning
. Press and hold the left mouse to drag the yellow line from " Offset
knob " and "Range knob" .
Data record number or Time display selection
Press the switch button and select between Record number and
Time ( xx : xx : xx ) the hour , minute , second . The record number
and time will display in turn while pressing the switch button .
Warning message
The left bottom corner will show a warning message while you just
retrieve an existing file without downloading a new logger.
<<< WARNING : Data Logger is not plug in interface module !>>>
After your downloading or retrieving a record , you will see the
number on the knobs of "Offset" and "Range" be changed to Offset:
0000/5000/10000/15000 and Range:50/250/500/1K/2K/4K/8K/12K/
16K. These are different from main screen without any records
displayed.
Display Control