Onkyo TX-SR8370 - Manual (Page 45)

45
First Time Setup —Continued
If you connect a component to a digital input, you must
assign that input to an input selector. For example, if you
connect your CD player to OPTICAL IN 2, you must
assign OPTICAL IN 2 to the CD input selector.
Here are the default assignments.
* The front panel optical DIGITAL input.
• TX-SR803/803E only
When HDMI IN 1 or 2 is assigned to an input selector
in the “HDMI Video Setup” on page 43, the input
selector assignment on this page is automatically set to
HDMI 1 or HDMI 2.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
Digital Audio Input Setup
Input selector Default assignment
DVD Coax 1
VIDEO 1 Opt 1
VIDEO 2 No
VIDEO 3 Opt 2
VIDEO 4 Front *
TAPE No
CD Opt 3
PHONO No
THX
10 - - / - - - 11 12
REMOTE MODE
HDD RECEIVER
TAPE/AMP
DVD CD
ZONE2
SAT TV VCR CABLE
MD CDR
STEREO SURR
DIRECT
SUBTITLE AUDIO
ALLST
PLAY MODE REPEAT
RANDOM REC PLAYLIST
+
-
T V CH
T V VOL
ENTER
SET
UP
TO P M ENU MEN
U
VOL
+
-
CH
DISPLAY
PREV
CH
DIMMER SLEEP
MUTING
LISTENING MODE
INPUT SELECTOR
3 2
MACRO
1
+10 0 CLEAR
1 2 3
4 5 6
7 8 9
INPUT I
ON STANDBY
T V
CD
V1 V2 V3
MULTI CH DVD
TUNER
PHONO
DISC ALBUM
V4
TAPE
PURE A
RE TURN
2 2, 3
1, 4
1
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “2. Digital
Input,” and then press [ENTER].
The Digital Input menu appears.
3 Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and then use the Left and
Right [
]/[ ] buttons to select:
Coax 1, Coax 2, Opt 1, Opt 2,
Opt 3, Opt 4, or No (analog).
For input selectors that you want to use
with an analog input, select No.
• Inputs cannot be assigned to the
TUNER input selector.
• The front panel optical DIGITAL
input (i.e., Front) can only be
assigned to the VIDEO 4 input selec-
tor.
• Only Front or No can be selected for
the VIDEO 4 input selector.
• On the TX-SR803/803E, an input
selector that’s been assigned to IN1
or IN2 in the “HDMI Video Setup”
(page 43) can be set to HDMI here.
4 Press the [SETUP] button.
Setup closes.
RECEIVER
ENTER
ENTER
2.Digital Input
------------------------
a.DVD :Coax1
b.VIDEO1 :Opt1
c.VIDEO2 :No
d.VIDEO3 :Opt2
e.VIDEO4 :Front
f.TAPE :No
g.CD :Opt3
h.PHONO :No
ENTER
ENTER