Onkyo TX-SR313 - Manual (Page 52)

Controlling Other Components
En-52
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your
component, you can control Onkyo component as
described below.
For details on entering a remote control code for other
components, see “Entering Remote Control Codes”
(
➔ page 50 ).
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the
*1
(limited to some models). The component must be able to
receive remote control commands via
and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
` 32910/33001/31612:
Blu-ray Disc/DVD player with
*1 The supported by the AV receiver is the CEC system
control function of the HDMI standard.
■ Blu-ray Disc player / HD-DVD player operation
■ DVD player operation
Controlling Other Components
Press the appropriate REMOTE
MODE button first.
Available buttons
Number: 1 to 9, 0
TOP MENU Number: +10 *1
/ / / , ENTER DISPLAY
SETUP MUTING
, , , , ,
,
DISC +/–
MENU
Red (A) RETURN
Green (B) AUDIO *1
Yellow (C) CLR
Blue (D)
Available buttons
Number: 1 to 9, 0
TOP MENU Number: +10 *1
/ / / , ENTER DISPLAY
SETUP MUTING
, , , , ,
,
DISC +/–
MENU
SEARCH *1 RETURN
REPEAT AUDIO *1
RANDOM *1 CLR
MODE *1