Onkyo TX-SR313 - Manual (Page 33)

Turning On & Basic Operations
En-33
The Home menu provides quick access to frequently used
settings. You can change settings and view the current
information.
Note
• The on-screen menus are displayed when:
– There is no video input, or
– The video input is 480p, 576p, 720p, 1080i, or 1080p.
Note
*1 Depending on the input source and listening mode, not all
channels shown here output the sound.
*2 • This setting is not available in either of the following cases:
– The “Audio TV Out” setting is set to “On” ( ➔ page 45 ).
– “HDMI Ctrl (RIHD)” is set to “On” ( ➔ page 45 ) and
you’re listening through your TV speakers.
You can use two sets of front speakers with the AV
receiver: Speakers A for up to 5.1-channel playback in
your main listening room and Speakers B for 2-channel
stereo playback in another room.
Using the Home Menu
The on-screen menus appear only on a TV that is
connected to the
HDMI OUT. If your TV is connected
to other video outputs, use the AV receiver’s display
when changing settings.
1 Press RECEIVER followed by HOME.
The Home menu will be superimposed on the TV
screen.
2 Use / and ENTER to make the desired selection.
■ Input
` You can select the input source.
Use / to select the desired input source.
Pressing ENTER switches to the selected input
source.
■ Audio
` You can change the following settings: “Bass”,
“Treble”, “Subwoofer Level”, “Center Level”,
“Late Night”, “Music Optimizer”, and “Cinema
Filter”.
See also:
• “Using the Audio Settings” ( ➔ page 46 )
■ Info *1
` You can view the information of the following
items: “Input” and “Output”.
■ Listening Mode *2
` You can select the listening modes that are
grouped in the following categories:
“MOVIE/TV”, “MUSIC” and “GAME”.
Use / to select the category and / to
select the listening mode. Press ENTER to
switch to the selected listening mode.
Selecting Speakers A and B
1 Press RECEIVER once followed by SP A/B
repeatedly to cycle through the selection:
Speaker indicators and output channels are shown
below.
Speaker indicators Output channel
Speakers A: 5.1 channels
Speakers A: 2.1 channels *3
Speakers B: 2 channels
Speakers B: 2 channels
No sound
*3 While Speakers B is on, channels are reduced to 2.1 in the
main room.
Tip
• Alternatively, you can use the AV receiver’s SPEAKERS
A and B.
Off
←
Speakers A
→
Speakers A&B
→
Speakers B
→
A
A B
B