Onkyo DV-SP405 - Manual (Page 24)

24
Connecting the Power/Turning on the DV-SP405
Before connecting
• Make sure that all the connections on pages 18–23 are
complete (the connection to a TV is required).
Note:
• This player features a screen saver and an auto power
off function. If the player is stopped and no button is
pressed for five minutes, the screen saver starts. If the
disc tray is closed but no disc is playing and no control
is pressed for 30 minutes, the player automatically
goes into standby.
STANDBY/ON
ON STANDBY
DISPLAY
MENU
HOME
MENU
TOP MENU
RETURN
AUDIO ANGLE
USB/DVD
SUBTITLE ZOOM
RC-699DV
CLEAR
OPEN/
CLOSE
ENTER
1 2 3
6
7 8 9
0
4 5
PLAY
MODE
ON
1 North American model:
Connect the power cord into the
power outlet on the wall.
Oceanian and European model:
Plug the supplied power cord into
the AC INLET and then into the
power outlet on the wall.
• Do not use a power cord other than the
one supplied with the DV-SP405. The
power cord supplied is designed for
use with the DV-SP405 and should not
be used with any other device.
• Never have the power cord discon-
nected from the DV-SP405 while the
other end is plugged into the wall out-
let. Doing so may cause an electric
shock. Always connect by plugging
into the wall outlet last and disconnect
by unplugging from the wall outlet
first.
2 Press STANDBY/ON on the
DV-SP405 or ON on the remote
controller.
The DVD Player turns on.
• To put the DV-SP405 in the standby
mode, press STANDBY/ON on the
DV-SP405, or STANDBY on the
remote controller. Be sure to set the
volume on the amplifier to minimum
before putting the DV-SP405 in the
standby mode for the next use to avoid
sudden loud sound reproduction.
• Setting the STANDBY/ON button to
standby does not shut off the power
completely.
To a wall
outlet
ON
Remote
controller