Olympus C-4040ZOOM - Manual (Page 19)

19
6 When is selected in green on
the screen, press
Ññ
to select
the date format.
● Select any one of the following
formats:
DMY (Day/Month/Year)
MDY (Month/Day/Year)
YMD (Year/Month/Day)
● This step and the following steps show the
procedure used when the date and time
settings are set to Y-M-D.
7 Press
í
to move to the year (Y) setting.
8 Press
Ññ
to set the year. When the year is set, press
í
to move to
the month (M) setting.
● Repeat this procedure until the date and time are completely set.
● To move back to the previous setting, press É
.
screen
9 Press .
● The camera returns to the menu screen.
● If
is pressed again, the menu will disappear and the screen will enter the
shooting mode.
● For a more accurate setting, don't press until the clock hits 00 seconds.
The clock starts when you press the button.
● The current settings stay the same even when the power is turned off,
unless they are readjusted.
● The date setting will be canceled if the camera is left with no batteries for
approx. 1 hour. If this happens, set the date again.
SELECT SET GO
SELECT SET GO SELECT SET GO
1 C-4040ZBasic-E2 01.6.25 11:16 AM Page 19