User controls – Optoma Digital Tuner Output Projector User Manual

Page 15

... English

12345678901234567890123456789012123456789012345678901

Using the Remote Control
Power/Standby

Refer to the “Power On/Off the Projector” section on pages

10-11.

Re-Sync

Automatically synchronizes the projector to the input source.

Volume + / -

Increases/decreases speaker volume.

Reset

Changes the adjustments and settings to the factory default

value.

Mute

Momentarily turns off the audio and video.

Keystone

Adjusts image distortion caused by tilting the projector (±16

degrees).

Page Up (Computer mode only)

Use this button to page up. This function is only available

when the projector is connected to a computer via an USB cable.

Page Down (Computer mode only)

Use this button to page down. This function is only available

when the projector is connected to a computer via an USB cable.

Freeze

Press “Freeze” to pause the screen image.

Four Directional Select Keys

Use

to select items or make adjustments to

your selection.

Menu

Press “Menu” to launch the on screen display menu. To exit

OSD, press “Menu” again.

Enter

Confirm your selection of items.

VGA

Press “VGA” to choose Analog RGB, component and HDTV

source.

S-Video

Press “S-Video” to choose S-Video source.

Composite

Press “composite” to choose Composite video source.

User Controls