Listening to the radio, Listening to am/fm stations, Utton (49) – Onkyo TX-SR804 User Manual
Page 49: S (49), Tuned (49), Fm stereo (49)

49
Listening to the Radio
With the built-in tuner, you can enjoy AM and FM radio
stations, and store your favorite stations as presets for
easy selection.
Tuning into AM/FM Radio Stations
■ Auto Tuning Mode
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
■ Manual Tuning Mode
The North American model changes FM frequency in
0.2 MHz steps, 10 kHz steps for AM. For other models
it’s 0.05 MHz steps for FM and 9 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Displaying AM/FM Radio Information
Listening to AM/FM Stations
1
Use the [TUNER] input selector
button to select AM or FM.
In this example, FM has been selected.
(Actual display depends on country.)
1
Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
2
Press the TUNING Up or Down
[
]/[
] button.
Searching stops when a station is
found.
OFF
TONE
ZONE 2
ZONE 2 LEVEL
PHONES
STEREO
DIMMER
MEMORY
LISTENING MODE
TUNING
MODE
SETUP
PRESET
PRESET
TUNING
RETURN
ENTER
SETUP MIC
VIDEO
S VIDEO
DIGITAL
VIDEO 4 INPUT
AUDIO
L
R
CLEAR
STANDBY/ON
STANDBY
MASTER VOLUME
TAPE
ZONE 2
DISPLAY
PURE AUDIO
CD
TUNER
VIDEO 4
VIDEO 3
VIDEO 2
VIDEO 1
DVD
MULTI CH
PHONO
OFF
ON
POWER
TUNING
TUNER
TUNING MODE
TUNER
Band
Frequency
TUNING
MODE
TUNING
AUTO
TUNED
FM STEREO
1
Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
2
Press and hold the TUNING Up or
Down [
]/[
] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
1
Press the [DISPLAY] button
repeatedly to cycle through the
available information.
TUNING
MODE
TUNING
PUSH TO OPEN
STANDBY/ON
STANDBY
MASTER VOLUME
TAPE
ZONE 2
DISPLAY
PURE AUDIO
CD
TUNER
VIDEO 4
VIDEO 3
VIDEO 2
VIDEO 1
DVD
MULTI CH
PHONO
OFF
ON
POWER
1
DISPLAY
Band, frequency,
and preset #
Listening mode