Onkyo TX-SR804 - Manual (Page 44)

44
First Time Setup—Continued
If you connect a video component to COMPONENT
VIDEO IN 1, 2, or 3, you must assign that input to an
input selector. For example, if you connect your DVD
player to COMPONENT VIDEO IN 3, you must assign
COMPONENT VIDEO IN 3 to the DVD input selector.
To upconvert ( * ) composite video and S-Video sources
and output them from the component video output,
select the “- - -” option.
Here are the default assignments.
Notes:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
• When the input selector assignment for the COMPO-
NENT VIDEO IN jacks is set to IN1, IN2 or IN3, the
“composite video to S-Video” and “S-Video to com-
posite video” conversions will not work.
Component Video Setup
Input selector Default assignment
DVD IN1
VIDEO 1 - - -
VIDEO 2 - - -
VIDEO 3 - - -
VIDEO 4 - - -
10 - - / - - - 11 12
REMOTE MODE
HDD RECEIVER
TAPE/AMP
DVD CD
ZONE2
SAT TV VCR CABLE
MD CDR
STEREO SURR
SUBTITLE AUDIO PLAY MODE REPEAT
RANDOM REC PLAYLIST
+
-
T V CH
T V VOL
ENTER
SET UP
TO P M ENU MEN
U
VOL
+
-
CH
DISPLAY
PREV
CH
DIMMER SLEEP
MUTING
LISTENING MODE
INPUT SELECTOR
3 2
MACRO
1
+10 0 CLEAR
1 2 3
4 5 6
7 8 9
INPUT I
ON STANDBY
T V
CD
V1 V2 V3
MULTI CH DVD
TUNER
PHONO
DISC
ALBUM
V4
TAPE
RE TURN
2 2, 3
1, 4
1
IN
OUT
( * )
Composite, S-Video
Composite, S-Video
Component
Component
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “1. Component
Video,” and then press [ENTER].
The Component Video menu appears.
3 Use the Up and Down [ ]/[ ]
buttons to select an input selec-
tor, and use the Left and Right
[
]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
IN3: Select if the video component
is connected to COMPO-
NENT VIDEO IN 3.
- - -: Select to output composite
video and S-Video sources
from the COMPONENT
VIDEO OUT.
4 Press the [SETUP] button.
Setup closes.
RECEIVER
ENTER
ENTER
1.Component Video
------------------------
a.DVD :IN1
b.VIDEO1 :---
c.VIDEO2 :---
d.VIDEO3 :---
e.VIDEO4 :---
ENTER
ENTER