Olympus DS-660 - Manual (Page 9)

9
Plug the optional AC adapter (Olympus Model
A321 or A322) into household power outlet
and connect the power plug to the recorder’s
power connector (DC 3 V) as shown in the
illustration. Always stop recording before
connection. Otherwise it may not be possible
to play back the voice data being recorded.
Warning
• Always stop recording before
connection or disconnection.
• When the AC adapter is not in use,
disconnect the power supply plug from
the power outlet.
• Use only the correct power supply
voltage as indicated on the adapter.
• Do not use the AC adapter when
connecting the recorder to the USB port.
Using the
AC
Adapter/Hold
Hold
Notes
• If you set the recorder to hold during Stop mode,
the display goes dark. If you press any button,
the time will flash for about 2 seconds, but the
function of the button is disabled.
• The alarm will sound at the scheduled time even
if the recorder is set to hold. The recorder begins
to play the file associated with the alarm when
you press any button.
• If you are recording when you switch the recorder
to HOLD, recording will continue until the recorder
memory runs out.
Setting the HOLD switch to the HOLD
position.
If you set the recorder to HOLD status by
sliding the HOLD switch in the direction of
the arrow, the current conditions will be
preserved, and all buttons and switches
except the HOLD switch will be disabled. This
feature is useful when the recorder has to be
carried in a bag or pocket.
Remember to reset the HOLD switch when
using the recorder.
HOLD
Using the AC Adapter