Olympus DS-660 - Manual (Page 17)

17
7 Start the recording.
When the sound volume is lower than the
preset threshold sound level, recording
automatically stops after 1 second
approximately, and “STANDBY” flashes on
the display. The record/play indicator lamp
glows when recording starts and flashes
when recording pauses.
Adjust the start/stop
actuation level
Using the VOLUME control, adjust the
start/stop actuation level.
The VCVA level can be set to any of 15
different values. The higher the value, the
more sensitive the recorder to sounds. At the
highest value, even the faintest sound will
activate recording.
The VCVA pause sound level can be adjusted
according to the ambient (background) noise.
a Start level
.........................................................................................................
Notes
• The start/stop actuation level also varies depending on the selected
microphone sensitivity mode (
☞ P.19).
• To ensure successful recordings, prior testing and adjustment of the
start/stop actuation level is recommended.
Using the V
ariable Control V
oice Actuator
(VCV
A)
0 0
M
5 1
S
S T A N D B Y
Low
High
0 0
M
5 8
S
V C V A L E V E L V C V A L E V E L
0 6 a