Ositech comm 614006-001 - Manual (Page 31)

User’s Guide and Reference 3 - 11
Operation
2. When prompted for ‘INSTALL NEW NETWORK ADAPTER’,
select ‘Unlisted’ or ‘Updated Network Adapter’ .
3. When prompted to ‘INSERT NETWORK DRIVER DISKETTE IN
DRIVE A:’ , place the Trumpcard driver diskette in drive A.
4. For WFW 3.1 enter
A:\WFW\31
For WFW 3.11 enter
A:\WFW\311
If you have used the configuration software to configure the Network
driver diskette use the default A:\
Then select ‘OK’.
5. Select ‘OSITECH TRUMPCARD’ from menu.
6. Continue with installation until complete.
If you have setup to use both the WFW 3.11 and Novell ODI, the following
example shows the PROTOCOL.INI, CONFIG.SYS, AUTOEXEC.BAT and
NET.CFG file changes made during the installation of Windows for
Workgroups version 3.11.
Your PROTOCOL.INI file under the Windows directory should contain the
following :
[Network.setup]
version=0x3110
netcard=osi$otceth,1,OSI$OTCETH,4
netcard=ms$odimac,1,MS$ODIMAC,4
transport=ms$nwlinknb, NWLINK
transport=ms$netbeui, NETBEUI
lana0=osi$otceth,1,ms$netbeui
lana1=ms$odimac,1,ms$netbeui
lana2=osi$otceth,1,ms$nwlinknb
[net.cfg]
PATH=C:\NOVELL\NET.CFG
[OSI$OTCETH]
[LINK DRIVER OTCETH]
[Link Driver XXXX]
[Link Support]
NewMaxBoards=Max Boards 8
OldMaxBoards=Max Boards 8