Setting the on-screen language/channels/ clock – Optimus 16-421 User Manual
Page 12
12
SETTING THE ON-SCREEN
LANGUAGE/CHANNELS/
CLOCK
The first time you turn on the TV/VCR, the
SELECT LANGUAGE
screen automatically ap-
pears. You can set the TV/VCR to display on-
screen menus in English or in Spanish. After
you select a language, the TV/VCR automatical-
ly scans through the channels and stores all ac-
tive channels in your area. Then the TV/VCR
automatically sets the clock if a broadcast sta-
tion with an EDS signal is available in your area.
Notes:
• Make sure you have connected the TV/
VCR to your cable system or an antenna
before continuing (see “Connecting an Out-
door Antenna” or “Connecting to a Cable
System” on Page 9).
• The on-screen language defaults to
English.
• EDS is a service provided by some broad-
casters such as PBS to transmit various
types of information, including the current
time. If no broadcaster in your area trans-
mits EDS signals, you must set the clock
manually after the TV/VCR finishes looking
for an EDS signal. If you want to use timer
recording immediately, you can stop the
TV/VCR from looking for an EDS signal by
setting the clock manually. See “Setting the
Clock Manually” on Page 15.
• The TV/VCR might not store active chan-
nels and automatically set the clock if the
signal the TV/VCR receives from your
antenna is weak.
1. Press
POWER
to turn on the TV/VCR. The
SELECT LANGUAGE
screen automati-
cally appears.
2. To select the on-screen language, press
CH
to select
ENGLISH
or
CH
to select
ESPANOL
(Spanish). The
CHANNEL/
CLOCK AUTO SET
screen automatically
appears.
Note: If you use a cable box, you must turn
it on and select an EDS broadcaster in your
time zone before pressing
CH
.
3. To automatically scan and store channels in
your area then automatically set the clock,
press
CH
.
CH AUTO SET PROCEEDING
appears
on the screen, and the TV/VCR stores
active channels (TV or CATV).
Notes:
• If the TV/VCR found no active channels
during the search, it beeps and displays
the following on the TV screen.
Check your antenna or cable connections,
then press
CH
again.
ANTENNA
ON THEN
Y AGA I N
ND
16-421.fm Page 12 Tuesday, July 20, 1999 12:01 PM