Onkyo HT-S580 - Manual (Page 42)

42
Common Functions
This chapter explains functions that can be used with any
input source.
When using the HT-R330 with the speakers included in
the HTP-330 Home Theater Speaker Package, by turning
on the OptiResponse equalizer, you can enjoy a powerful
sound with movies or music.
With this function, you can adjust the brightness of the
display.
You can adjust the bass or treble for the front speakers
except when the Direct listening mode is selected.
■ Bass
You can boost or cut low-frequency sounds output by the
front speakers from –10 dB to +10 dB in 2 dB steps.
■ Treble
You can boost or cut high-frequency sounds output by
the front speakers from –10 dB to +10 dB in 2 dB steps.
Note:
• To bypass the bass and treble tone circuits, select the
Direct listening mode.
With this function, you can temporarily mute the output
of the AV receiver.
To unmute the AV receiver, press the remote control-
ler’s [MUTING] button again, or adjust the volume. The
output is unmuted and the MUTING indicator goes off.
Muting is cancelled when the AV receiver is set to
Standby.
Using the OptiResponse Equalizer
Press the [OR-EQ] button to turn
the OptiResponse equalizer on
or off.
MUTING
MENU TOP MENU
SP A / B
SETUP RETURN
RANDOM SUBTITLE
PLAY MODE
AUDIO REPEAT
RC- 606 S
--/---
TAPE/AMP
ON STANDBY
DIMMER SLEEP
INPUT SELECTOR
REMOTE MODE
V 1 V 2 V 3
C D TAPE TUNER
DVD MULTI CH
LISTENING MODE
DISPLAY
TEST TONE CH SEL
SURROUND STEREO
CINE FLTR
LEVEL+ LEVEL-
L NIGHT OR-EQ
VOL
CDR
MD
DVD RECEIVER
C D
+10 0 CLR
1 2 3
4 5 6
7 8 9
ENTER
CH
DISC
MUTING
CH SEL
LEVEL – +
SLEEP DIMMER
TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER CD
MASTER VOLUME
A SPEAKERS B
TONE, –, +
PHONES DIMMER
Press
[RECEIVER]
first
OR-EQ
Setting the Display Brightness
Press the remote controller’s
[DIMMER] button repeatedly to
select: dim, dimmer, or normal
brightness.
Alternatively, you can use the [DIM-
MER] button on the AV receiver (not
European models).
Adjusting the Bass & Treble
1 Press the AV receiver’s [TONE]
button repeatedly to select either
Bass or Treble.
2 Use the TONE [–]/[+] buttons to
adjust.
Muting the AV Receiver
Press the remote controller’s
[MUTING] button.
The output is muted
and the MUTING
indicator flashes on
the display, as shown.
TONE
+