beautypg.com

Replacing the lamp, Appendices – Optoma Optoma ES520 User Manual

Page 50

background image

English

0

Replacing the Lamp

The projection lamp should be replaced when it burns out. It should

only be replaced with a certified replacement part, which you can

order from your local dealer.

Important:

4

The lamp contains a certain amount of mercury and should be

disposed of according to local ordinance regulations.

4

Avoid touching the glass surface of the new lamp, doing so may

shorten its operation life.

Warning:

4

Be sure to turn off and unplug the projector at least an hour before

replacing the lamp. Failure to do so could result in a severe

burn.

1. Loosen the two captive screws on the lamp compartment cover.
2. Remove the lamp compartment cover.
3. Remove the two screws from the lamp module.
4. Lift the module handle up and pull firmly on the module handle

to re-move the lamp module.

Appendices