Optoma Optoma ES520 - Manual (Page 17)

English
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with elevator foot for adjusting the image height.
To raise the image:
1. Press the elevator button u.
2. Raise the image to the desired height angle v, then release the
button to lock the elevator foot into position.
3. Use screw in foot w to fine-tune the display angle.
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the elevator
feet into position.
3. Use screw in foot w to fine-tune the display angle.
1
2
3
Installation