Olympus C-170 - Manual (Page 89)

89
8
Appendix
Troubleshooting
Error codes
Monitor indication Possible cause Corrective action
q
NO CARD
The card is not inserted,
or it cannot be
recognized. Insert a card, or remove the card
and insert it again correctly.
If the problem persists, format the
card. If the card cannot be
formatted, use a new card.
The internal memory can be used
without inserting a card.
q
CARD ERROR
There is a problem with
the card. This card cannot be used. Insert a
new card.
q
WRITE-
PROTECT
Writing to the card is
prohibited. The recorded image has been
protected (read-only) on a
computer. Download the image to a
computer and cancel the read-only
setting.
>
MEMORY FULL
There is no empty
space in the internal
memory, so it cannot
record new data. Insert a card, copy the pictures to
the card, or erase unwanted
pictures. Before erasing, download
important images to a computer.
q
CARD FULL
No more print
reservations, backups
of the internal memory,
or pictures can be
stored on the card. Replace the card or erase unwanted
pictures. Before erasing, download
important images to a computer.
L
NO PICTURE
There are no pictures in
the internal memory or
the card. The internal memory or the card
contain no pictures. Record
pictures.
r
PICTURE
ERROR
There is a problem with
the selected picture and
it cannot be played back
on this camera. Use image processing software to
view the picture on a computer. If
that cannot be done, the image file
is damaged.
CARD-COVER
OPEN
The battery
compartment/card
cover is open. Close the battery compartment/card
cover.
Y/M/D
When the camera is used
for the first time or the
battery has been
removed for a long time,
the date and time are on
the factory default setting. Set the date and time.
This card cannot be
used with this camera
or the card is not
formatted. • Format the card or replace.
• Select [POWER OFF] and press
i. Insert a new card.
• Select [FORMAT] and press i.
All data on the card is erased.
CARD SETUP
POWER OFF
FORMAT
SELECT GO