Onkyo PHC-5 - Manual (Page 14)

14
Operating the PHC-5 System (continued)
Other functions
Turning off the light on the display
Pressing the DISPLAY button turns on/off the light on the display of the unit.
This button is disabled in Stereo mode.
Adjusting the balance
√ : Press this button to shift the sound to the left.
® : Press this button to shift the sound to the right.
Note on adjusting the balance:
In Virtual Surround mode, set the balance in the center position and do not
adjust it. Shifting the sound in this mode may impair the Virtual Surround
effect.
•
The PHC-5 remembers the balance setting in Stereo mode after you turn off
the power to the unit. However, if you change to Virtual Surround mode, the
balance setting is automatically reset to the center. Also, any balance setting
made in Virtual Surround mode will be reset to the center after you turn off
the power to the unit.
Muting the sound
Press the MUTING button to mute the sound. Press the button again or press the
VOLUME buttons (VOLUME†/π) to cancel muting.
•
The LEVEL meter flashes during mute.
SENDING/
LEARNED
POWER
POWER
TV/VCR
POWER
TV/VIDEO
DISTANCE EXPAND
MODE
TV
SURROUND
FRONT BALANCE
VIDEO
INPUT SELECTOR
VOLUME
AUX
SUB
MUTING
VOLUME
TV CONTROL
VIDEO CONTROL
CH
DISPLAY LEARN
REMOTE CONTROLLER RC-382M
DISPLAY
FRONT BALANCE
NORMAL
WIDE
PANORAMA
The sound pans The sound pans
to the right.
to the left.
MUTING
LEVEL MAX MIN
Flash