Onkyo CR-505DA - Manual (Page 9)

9
Controls & Connectors— Continued
For detailed information, refer to the pages in parentheses.
1 REMOTE CONTROL (15)
This (Remote Interactive) connector can be con-
nected to the connector on another Onkyo compo-
nent. To use , you must make an analog RCA/phono
connection between the CR-505DAB and your other
component, even if they are connected digitally.
2 DAB ANTENNA (13)
This connector is for connecting the supplied DAB
antenna. CR-505DAB only scans UK Band III.
3 FM 75 Ω ANTENNA (12, 13)
This connector is for connecting an FM antenna.
4 AM ANTENNA (12, 13)
These push terminals are for connecting an AM antenna.
5 OPTICAL DIGITAL OUT (14, 15)
This connector can be used to connect a Mini Disc
recorder or other component with digital input.
6 SUBWOOFER PRE OUT (11)
This RCA/phono connector can be used to connect an
active subwoofer.
7 SPEAKERS (11)
These terminals are for connecting left and right speakers.
8 TAPE IN/OUT (14)
These RCA/phono connectors can be used to connect a
cassette tape deck or other recorder with analog inputs
and outputs.
9 MD IN/OUT (14, 15)
These RCA/phono connectors can be used to connect a
Mini Disc recorder or other recorder with analog inputs
and outputs.
0 LINE IN (14)
These RCA/phono connectors can be used to connect
another component.
Rear Panel
OUT OUT
SPEAKERS
R L
FM75 DAB
ANTENNA
PRE OUT
OPTICAL
DIGITAL
OUT
SUB
WOOFER
IN IN IN
REMOTE
CONTROL
TAPE LINE MD
R
L
R
L
AM
2 1
8 9 0
3 4 5 6 7