Onkyo CR-505DA User Manual

Page 4

Precautions—

Continued

Memory backup

The CR-505DAB uses a battery-less memory backup sys-
tem in order to retain radio presets and other settings when
it’s unplugged or in case of a power failure. Although no
batteries are required, the CR-505DAB must be plugged
into an AC outlet in order to charge the backup system.
Once it has been charged, the CR-505DAB will retain the
settings for several weeks, although this depends on the
environment and retention will be shorter in humid cli-
mates. The clock setting is not retained by the backup sys-
tem.

This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT.” So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit. To prevent exposure to
the laser beam, do not try to open the enclosure.

DANGER:

VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK FAILED OR
DEFEATED. DO NOT STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.

This label is located on the side of the unit. It indicates
that:
1. This unit is a CLASS 1 LASER PRODUCT and

employs a laser inside the cabinet.

2. To prevent the laser from being exposed, do not

remove the cover. Refer servicing to qualified per-
sonnel.

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

I. MORI

declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.