Oregon Scientific weather station with fm pll radio BARM688 - Manual (Page 6)

6
E
N
CLOCK
CLOCK RECEPTION
This product is designed to synchronize its clock
automatically with a clock signal.
To select clock signal:
Slide EU / UK to select the signal received.
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
To enable / disable signal reception:
Press and hold TUNE to enable or TUNE to disable
signal reception.
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
Clock signal reception indicator:
STRONG SIGNAL WEAK SIGNAL NO SIGNAL
MANUALLY SET CLOCK
1. Press and hold MODE for 2 seconds.
2. Press TUNE / to change the settings.
3. Press MODE to confirm.
4. The setting sequence is: time zone offset, 12 / 24
hour format, hour, minute, year, day / month format,
month, day, and display language.
TIPS Time zone offset sets the clock +/- 23 hours
from the received clock signal time. The language
options are (E) English, (F) French, (D) German, (I)
Italian, and (S) Spanish.
To select clock display mode:
Press MODE to toggle between:
• Clock with seconds
• Clock with weekday
• Calendar
ALARM
To set the alarm:
1. Press ALARM to view the alarm. will show on
the display.
2. Press and hold ALARM for 2 seconds.
3. Press TUNE / to change the hour, minute,
beep ( ) or radio ( ) alarm. If you select the
radio alarm, press to select the radio station to be
played and VOL / to set the volume.
4. Press ALARM to confirm.
To activate or deactivate the alarm:
Press ALARM when in alarm display.
or
appears when the alarm is set.
BARM688_M_EN.indd 6 3/5/07 3:37:38 PM