Oregon Scientific weather station with fm pll radio BARM688 - Manual (Page 5)

E
N
5
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
The transmission range may vary depending on many
factors. You may need to experiment with various
locations to get the best results.
NOTE We recommended that you use alkaline
batteries with this product for longer usage and
consumer grade lithium batteries in temperatures
below freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Simultaneously, press and hold MEM and CH for 2
seconds.
The reception icon shown in the outdoor temperature
area shows the status.
ICON DESCRIPTION
Main unit is searching for
the sensor(s)
Sensor 1 data received
and “- -”
The sensor cannot be
found
NOTE If the sensor is not found, check the batteries,
obstructions, and remote unit location.
For best results:
• Place the sensor out of direct sunlight and moisture.
• Position the sensor facing main unit, minimizing
obstructions.
• Place the sensor in a location with a clear view to the
sky, away from metallic or electronic objects.
• Position the sensor close to the main unit during cold
winter months.
LIGHT TOUCH KEY-LOCK
When no key has been pressed for 1 minute,
appears to indicate key-lock is activated. Press any
key to disable.
BARM688_M_EN.indd 5 3/5/07 3:37:36 PM