Onkyo TX-SR703/703E - Manual (Page 77)

77
Advanced Setup—Continued
Character Edit
With this setting, you can enter a custom name for each
input source. When the input source is selected, its name
will appear on the display.
To delete all the characters in a name:
In step 5, press the Left [
] button instead of the Right
[ ] button.
Notes:
• When the multichannel input is selected, the same
name as for DVD is displayed.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
1 Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “4. Input Setup,”
and then press [ENTER].
The Input Setup menu appears.
3 Use the Up and Down [ ]/[ ]
buttons to select “Character
Edit,” and then press [ENTER].
The Character Edit menu appears.
4 Use the Up and Down [ ]/[ ]
buttons to select “Character Dis-
play,” and use the Left and Right
[
]/[ ] buttons to select:
No (Default): The default name is
displayed.
Yes: The custom name is
displayed.
This setting determines if the default
name or the custom name you enter is
displayed when the input source is
selected.
RECEIVER
ENTER
ENTER
4.Input Setup
---------VIDEO1---------
1.Delay
2.Character Edit
ENTER
ENTER
4-2.Character Edit
---------VIDEO1---------
a.Character Display
:Yes
b.Character
:
Press to Edit
to Clear
ENTER
ENTER
5 Press the Down [ ] button to
select “Character,” and then
press the Right [
] button to
open the character input screen.
6 Use the arrow [ ]/[ ]/[ ]/[ ]
buttons to select a character, and
then press [ENTER].
7 Repeat step 6 to enter up to 10
characters.
If you enter a character by mistake:
Press the [RETURN] button to move
the cursor back one place.
To correct a character:
1. Press the [ENTER] or [RETURN]
button repeatedly to select the char-
acter to be corrected.
2. Use the Left and Right [ ]/[ ]
buttons to select the new character,
and then press [ENTER].
If the name contains less than 10 char-
acters, select “Exit,” and then press
[ENTER].
8 Press the [SETUP] button.
Setup closes.
ENTER
ENTER
4-2.Character Edit
---------VIDEO1---------
b.Character
:
---+
| ABCDEFGHIJKLM|
| NOPQRSTUVWXYZ|
| abcdefghijklm|
| nopqrstuvwxyz|
| 0123456789-.'|
| ()+*/=,:;!?_ |
| [Exit]|
+-------------+
ENTER
ENTER