Oregon Scientific Oregon Scientific - Manual (Page 8)

8
EN
Southern hemisphere
New
Moon
Full Moon
Waxing
Crescent Waning
Gibbous
First
quarter Third
quarter
Waxing
Gibbous Waning
Crescent
AUto SCANNING FUNCtIoN
to activate the outdoor temperature and humidity
auto-scan function:
. Press SELECt to navigate to the Temperature or
Humidity Area. will show next to the Area.
2. Press and hold ModE to activate auto-scan. The
temperature and humidity display will scroll from
indoor to ch through to ch3.
3. Press any key to stop the auto-scan.
NotE Channel is used for the outdoor temperature
and humidity sensor. Additional temperature and humidity
sensors can use other channels.
WEAtHER FoRECASt
This product forecasts the next 2 to 24 hours of weather
forecast within a 30-50 km (9-3 mile) radius.
Weather Forecast Area
ICoN dESCRIPtIoN
Sunny
Partly cloudy
Cloudy
Rainy
Snowy
tEMPERAtURE ANd HUMIdItY
the weather station displays indoor and outdoor
readings for:
. Temperature / relative humidity (current / maximum /
minimum)
2. Trend line
3. Wind chill (current / minimum) and dew point level
(current/ maximum / minimum)
The weather station can connect up to 3 remote sensors.
NotE Channel is dedicated for outdoor temperature
and humidity.
shows which remote sensor’s data you are viewing.
appears when indoor data is displayed.
The timestamp records the date and time when storing
the temperature and humidity readings in memory.
to select the temperature measurement unit:
Press UNIt to select °C / °F.
NotE The unit of all temperature related displays will
be changed simultaneously.
to view temperature (Current / Max / Min temperature)
readings:
. Press SELECt to navigate to the Temperature Area.
will show next to the Area.
2. Press UP / doWN to select the channel.
3. Press MAX / MIN to toggle between current / MAX /
MIN displays.
to view humidity (Humidity, dew point) readings:
. Press SELECt to navigate to the Humidity Area.
will show next to the Area.
2. Press UP / doWN to select the channel.
3. Press ModE repeatedly to toggle between the
humidity / dewpoint displays.
4. Press MAX / MIN to toggle between current / MAX /
MIN displays.
The timestamp is displayed accordingly in the Clock Area.
to clear the memories and timestamp for the
temperature, humidity and dew point readings:
In the Temperature or Humidity Area, press and hold
MAX / MIN to clear the readings.
NotE The dew point advises at what temperature
condensation will form.
tEMPERAtURE ANd HUMIdItY tRENd
The trend lines are shown next to the temperature and
humidity readings. The trend is shown as follows:
RISING StEAdY FALLING
WINd CHILL / dIRECtIoN / SPEEd
The base station provides
wind speed and wind direction
information.
To read the wind direction find
the compass point the
is
pointing to.
The timestamp records the date and time when storing
the wind speed readings.
to select the wind speed unit:
Press UNIt to switch between:
• Metres per second (m/s)
• Kilometers per hour (kph)
• Miles per hour (mph)
• Knots (knots)
WMR180_UM_EN_R7.indd 8 2011/5/30 3:57:29 PM