Oregon Scientific IB368 - Manual

1
IMPORTANT SAFETY INSTRUCTIONS
The iBall Wireless Stereo Speaker with Transmitter Dock
for iPod is designed to give you years of service if
handled properly. Ensure that you heed all warnings to
minimize product malfunction and reduce the chances
of incurring personal injury. Before using the unit,
observe the following guidelines to ensure proper care
and maintenance.
The lightning flash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage" within
the products enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
T h e e x c l a m a t i o n p o i n t w i t h i n a n
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accom-
panying the appliance.
To prevent fire or shock hazard, do not use this plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade
exposure.
READ INSTRUCTIONS
All safety and operating instructions should be read and
followed before operating the product and should be
retained for future reference. All warnings on the product
and in the operating instructions should be adhered to.
CLEANING
Unplug all adapters and cables from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
ATTACHMENTS
Do not use attachments not recommended by Oregon
Scientific as they may cause hazards.
WATER AND MOISTURE
Do not use this product near water - for example, near a
bathtub, washbowl, kitchen sink or laundry tub; in a wet
basement; or swimming pool; and the like.
ACCESSORIES
Take care when placing the product on an unstable cart,
stand, tripod, bracket or table. Quick stops, excessive
force and uneven surfaces may cause the system to
overturn and fall, causing serious injury to a child or adult,
and serious damage to the product. Use only with a cart,
stand, tripod, bracket or table recommended by Oregon
Scientific, or sold with the product.
VENTILATION
Slots and openings in the product are provided for
ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings should
never be blocked or covered by placing the product on a
bed, sofa, rug or other similar surface. The product should
not be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or Oregon
Scientificís instructions have been adhered to.
HEAT
The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
POWER SOURCES
The system should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult
your Oregon Scientific dealer or local power company.
For products intended to operate battery power, or other
sources, refer to the operating instructions.
GROUNDING OR POLARIZATION
The product may be equipped with a polarized
alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power
outlet only one way. The product may be equipped with
a 3-blade grounding-type plug, a plug having a third
(grounding) pin. This plug should only fit into a grounding-
type power outlet.
Both plugs are safety features of the product. If either
plug is unable to fully insert into its respective outlet, try
reversing the plug. If the plug should still fail to insert,
contact your electrician to replace the obsolete outlet.
Do not defeat the safety purpose of the polarized or
grounding-type plug.
POWER-CORD PROTECTION
Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where
they exit from the product.
PROTECTIVE ATTACHMENT PLUG
The product is equipped with an attachment plug having
overload protection. This is a safety feature. See user
manual for replacement or resetting of protective device.
If replacement of the plug is required, be sure the service
technician has used a replacement plug specified by
Oregon Scientific that has the same overload protection
as the original plug.