Onkyo SKF-540F - Manual (Page 47)

47
Using the Listening Modes —Continued
The following table shows which listening modes can be used with each input signal format.
: Only available on 6.1/7.1-channel playback systems. Not available while speaker set B is on.
: Only available on 7.1-channel playback systems. Not available while speaker set B is on.
Source format
Listening mode
Analog,
PCM *1
*1. In the Pure Audio and Direct listening modes, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In
listening modes other than Pure Audio, Direct, and Stereo, 64 kHz, 88.2 kHz, and 96 kHz PCM is processed at 32 kHz, 44.1 kHz, and 48 kHz
respectively.
Dolby Digital DTS/DTS 96/24 *2
*2. In listening modes other than Pure Audio, Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS.
Multich
analog 3/2.1
2/2.1
2/0 1/0, 1+1 Other
3/2.1
2/2.1
2/0
DTS-ES
Discrete Matrix
CD, TV,
radio,
cassette,
etc.
DVD, DTV, etc. DVD, CD, etc. DVD
Pure Audio (Not North
American models)
Direct
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Stereo
Mono ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Multich
✔
PLIIx Movie/Music/Game *3
Neo:6 Cinema
Neo:6 Music
*3. If the Surr Back parameter is set to None, or speaker set B is on, normal Pro Logic II is used.
✔ ✔ ✔
Neural Surround (North
American models only)
✔ *4
*4. Not available for 88.2 kHz and 96 kHz PCM input signals.
Dolb
y
Dolby D
✔ ✔
Dolby D + Neo:6
Dolby D EX
Dolby D+PLIIx Music
✔
Dolby D+PLIIx Movie
✔
DTS
DTS, DTS 96/24
✔ ✔ *5
*5. If the Surr Back setting is set to None, or speaker set B is on, normal DTS is used.
DTS-ES Discrete
✔
DTS-ES Matrix
✔
DTS+Neo:6
DTS+Dolby EX
DTS+PLIIx Music
✔
DTS+PLIIx Movie
✔
Onkyo
Original
DSP
Mono Movie
Orchestra
Unplugged
*6
Studio-Mix
TV Logic
All Ch Stereo
Full Mono
*6. Available only when surround speakers are connected.
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Tip: To check the format of the digital input signal, see “Displaying Source Information” on page 37.