Onkyo SKF-540F - Manual (Page 41)

41
Listening to the Radio —Continued
Signing Up for XM Satellite Radio
Before you can use XM Satellite Radio, you must first
sign up for an account. You’ll need a major credit card
and your
XM Satellite Radio ID, which you can get from
the AV receiver, as explained below, or from the Passport
System package and itself.
Notes:
• Channel 0 cannot be selected in Category Search
mode. You must select Channel Search mode (see
page 41).
• The following letters are not used in XM Satellite
Radio IDs: I, O, S, F.
Selecting XM Radio Channels
There are three ways to select XM radio channels:
•
Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
Note:
You can’t select Channel Search or Category Search
mode, while the Tuning Arrow
indicators are
flashing, as tuning is in progress.
■ Channel Search Mode
■ Category Search Mode
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
1 Use the TUNING Up and Down
[
]/[ ] buttons to select
channel 0.
Your XM Satellite Radio ID number is
displayed. Write it below.
ID
2 To sign up, go to:
http://activate.xmradio.com
Or call: 1-800-967-2346
For XM Canada, go to:
http://xmradio.ca
Or call: 1-877-GET-XMSR
TUNING PRESET
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SP A / B
SETUP RETURN
PLAYLIST/CAT PLAYLIST/CAT
--/---
TAPE
M D/CDR
HDD
CABLE
ON/STANDBY
DIMMER
ENT D TUN
SLEEP
10 11 12
INPUT SELECTOR
REMOTE MODE
V 1 V 2 V 3
C D TAPE TUNER
DVD MULTI CH
T V VOL VOL
SAT
VCR
T V
DVD RECEIVER
C D
INPUT
+10 0 CLR
1 2 3
4 5 6
7 8 9
ENTER
CH
DISC ALBUM
ENTER
RECEIVER
RETURN
ENT
D TUN
Number
buttons
1 Press the [RECEIVER] button,
followed by the [ENTER] button
to select “Channel Search”
mode.
2 Use the Up and Down [ ]/[ ]
buttons to select a channel.
You can also use the Left and Right
[
]/[ ] buttons to select a category.
1 Press the [RECEIVER] button,
followed by the [ENTER] button
to select “Category Search”
mode.
2 Use the Left and Right [ ]/[ ]
buttons to select a category, and
use the Up and Down [
]/[ ]
buttons to select a channel in
that category.
1 Press the [RECEIVER] button,
followed by the [D TUN] button.
The [RECEIVER] button flashes.
2 Within 8 seconds, use the num-
ber buttons to enter the channel
number.
The channel is selected.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [ENT].
Note : While the [RECEIVER] button is
flashing, the input source cannot be
changed by using the remote controller.
Channel name Channel number
D TUN
DIMMER
ENT
SLEEP
11 12
V 1 V 2 V 3
C D TAPE TUNER
DVD MULTI CH
0 CLR
1 2 3
4 5 6
7 8 9