Orion 2000 - Manual (Page 45)

User’ Guide 45
Set TFTP filename to "ram.cpr"
¾
tftp server {Server IP address}
Establishes the IP address of the TFTP server for firmware download
Example:
CM>tftp server 92.146.1.250
Set TFTP Server to 92.146.1.250
DHCP
¾ dhcp {enable/disable}
Enable/disable dhcp server
¾
dhcp lease-time { 30-2147483647 seconds}
Set dhcp server ip lease time
¾
dhcp dns add {1~4} {ip address}
Set dhcp server dns ip address, it allows maximum 4 dns setting.
¾
dhcp dns delete {1~4/all}
Remove dhcp server dns ip address setting.
Note: if NAT is enabled, the following DHCP command can bet set
¾
dhcp ip-pool add {start IP} {end ip}
Set dhcp server ip pool range
Example:
CM> dhcp ip-pool add 192.168.100.2 192.168.100.4
CM>show dhcp
TFTP Server IP address : 172.19.89.19
Cable Modem IP address : 10.71.135.99
Configuration file : DEF001.cfg
Lease time : 86400 (secs)
UTC time offset : -28800 (secs)
SystemLog Server IP address : 172.19.89.19
Router IP address : 10.71.128.1
SubnetMask : 255.255.240.0