Orion 2000 User Manual

Page 26

User’ Guide

device drivers

4. Select USB Composite Device and click Remove
5. Click Refresh

The Add New Hardware Wizard window appears, displaying the device name USB Composite Device.
Refer to the proper operating system instructions in this chapter for information on reinstalling the
driver properly.

All of the LEDs on the front of my modem look correct, but I cannot access the Internet.

• If the POWER, USB, SYNC, and READY are solidly lit, the cable modem is working

properly. Use the following procedures to verify connectivity between the PC and the cable
modem:
o Launch Your PC’s Internet Browser (e.g., Netscape, IE)
o Enter http://192.168.100.1 into your browser. This URL connects you directly to the

web server within your cable modem. A successful connection indicates that the PC is
able to communicate with the cable modem. The next step is to enter a public URL to
ensure connectivity between the cable modem and your cable service provider. If this
fails, please contact your cable service provider for further assistance.