One for All URC-7721 - Manual (Page 9)

WWW.ONEFORALL.COM
9
It is possible to change the mode of any device key. This is useful if you
want to set up two of the same devices on the ONE FOR ALL 2. The code
can be set up using “Direct code set up” (p. 6) or “Search method” (p. 7).
To change a device key, see the three examples below.
Example 1 if you like to program a second TV on the DVD key.
Example 2 if you like to program a 2nd DVD Player / DVD-R on the TV key.
Example 1:
To program a second Television on the DVD key (for example), you need
to change the DVD key into a TV key, so press:
(*) (**)
The DVD key has now become a second TV key.
Now enter the Set-Up code for your second TV by pressing:
(*) (TV code) (**)
Example 2:
To program a second DVD Player / DVD-R on the TV key (for example),
you need to change the TV key into a DVD key, so press:
(*) (**)
The TV key has now become a second DVD key.
Now enter the Set-Up code for your 2nd DVD Player / DVD-R by pressing:
(*) (DVD code) (**)
Resetting a Device key
Example: To reset the TV key to its original mode, press:
(*) (**)
Example: To reset the DVD key to its original mode, press:
(*) (**)
(*) Press and hold down the MAGIC key until the red light (LED)
blinks twice.
(**) The red light (LED) will blink once then twice.
Extra Features
Mode re-assignment
(Changing a device mode)
DVD
DVD
DVD DVD
DVD
_ _ _ _
_ _ _ _
705007_URC-7721_S-10:URC-7720 TANGO 2 Scand-grieks 27-02-2007 12:09 Pagina 9