Olympus P-400 - Manual (Page 9)

4
US
CAUTION
■ Do not block the vent.
Doing so may cause the printer to heat up, possibly resulting in fire or electric shock.
• Do not block the top or side vent.
• Do not put the printer in the following places.
– Badly-ventilated place
– On a soft surface like a rug or bed
■ Do not put the printer on an unstable surface such as a shaky table.
If the printer falls out of place, it may injure someone. This may also damage the printer or
cause the printer to malfunction.
■ Do not touch the non-user-serviceable parts inside the printer.
Doing so may cause injury or burns. This applies especially to children and those unfamiliar
with the printer.
■ Do not move the printer when the power cord is taut.
Doing so may damage the cord, possibly resulting in fire or electric shock. When moving the
printer, unplug and bundle the power cord.
■ Do not pull the cord with a jerk.
To unplug the power cord, hold it by the plug.
Pulling on the cord may damage it, possibly resulting in fire or electric shock.
■ Do not hold the power cord plug with wet hands.
Doing so may cause an electric shock. Be sure hands are dry before handling.