Olympus DS 150 - Manual (Page 17)

33 32
DICTATION MODE BUTTON
For optimum results in voice recognition and voice-text conver-
sion, press the DICTATION MODE button
ᕩ
. All settings are
automatically adjusted to ensure best results.
• Recording mode setting: Standard Play (SP) mode
• Microphone sensitivity setting: Dictation (DICT) mode
• Alarm setting: The alarms are set to OFF.
t Voice data recorded in the long play (LP) mode cannot be used
in voice recognition.
ERASE SP DICT
INDEX/
FOLDER
MENU
TROUBLESHOOTING (Questions and Answers)
Q-1: No display on the LCD panel.
A-1: Are the batteries correctly installed? Are the batteries dead? Is the HOLD switch set to
HOLD position? Is the Standby mode engaged?
Q-2: No operation accepted.
A-2: Is the HOLD switch set to HOLD? Are the batteries dead? Is the battery cover open?
Q-3: Recording is not possible.
A-3: Is the remaining memory at zero?
Q-4: The indicator LED does not light during recording.
A-4: Is there any memory remaining? Is the HOLD switch set to HOLD?
Q-5: An alarm sounds during recording.
A-5: Is the remaining memory low or at zero?
Q-6: No sound during playback or playback volume is low.
A-6: Is the volume set to an optimum level?
Q-7: Index signals are not being recorded?
A-7: Have 16 index signals already been recorded?
Q-8: The clock and ID number have been reset.
A-8: Was the memory formatted?
Q-9: The clock time has changed.
A-9: Did you take a long time to open the battery cover and the batteries? Set the clock again if
you want the correct time.
Q-10: The AC adapter does not work.
A-10: Are you using optical adapter?
OTHER
RESET
If an LCD panel display or operational error occurs, gently press the reset button inside the battery
compartment with a slender object such as the tip of a ball-point pen. Do not remove the batteries.
t Previously recorded messages will not be erased.
t Pressing the reset button may alter the clock time slightly
(because the clock stops temporarily when the battery
compartment is opened).
t Do not press the reset button with a sharp object.
TRANSFERRING DATA TO A PC
This recorder is equipped with a PC/IF connector
ƿ
to enable recorded voice data to be transferred
to a PC. For more details on how to transfer data and voice recognition software, refer to the instruc-
tion manual provided with the DS-150 Via Voice kit (if you have purchased it).
T572 Inst DS-150-E.Q33J 1999/4/26 0:57 PM y [ W 32