Olympus VN-180 - Manual (Page 12)

12
1
When folder [S] is selected:
• Erasing all messages for a
selected date - When the ERASE
button is pressed and held for
more than 2 seconds, the LCD
shows [ALL] together with
alternately blinking
date and
[YES]. Press the ERASE button
within 4 seconds again to erase
all of the messages for the
selected date.
• Erasing all messages in folder [S] - When the ERASE button is
pressed and held for more than 4 seconds, the LCD shows [ALL]
together with alternately blinking [ERASE] and [YES]. Press the
ERASE button within 4 seconds again to erase all messages in
folder [S].
✰ Resetting the recorder (CLEAR)
1 Hold the STOP button and press
and hold the ERASE button for
more than 2 seconds. The LCD
shows [CLEAR] and [YES]
alternately.
2 Press the ERASE button again within 4 seconds. All messages
in all folders are erased and the recorder is reset to the default
setting.
This also resets the current time and other settings to their initial
status.
If any button other than the ERASE button is pressed while the
LCD shows [CLEAR], selected date, [ERASE] and [YES]
alternately or if the ERASE button is not pressed within four
seconds of the start of the alternate display, the message erase
or reset operation will be aborted and the LCD returns to the
previous display condition.