Olicom A400A - Manual (Page 43)

41
ATM Interface & VCs
This ADSL router connect/communicate with WAN via ATM/ADSL. In
the ATM structure, this ADSL router has VC (Virtual Circuit) function and
It can set up one or several Virtual Interfaces to proceed connection/
communication individually or simultaneously.
You can configure ATM settings for each virtual circuit. The selection
made for one virtual circuit does not affect other virtual circuits. The
screen that appears depends on the operation mode you selected.
The information you want to configure on each interface is supplied by
your ISP, the content is same as Quick Setup. Please refer to page
12 the instruction of Quick Setup.
Click the OK button to store your modified configuration in this ADSL
router memory. Or click Cancel button to return to main page.
Note:If you would like to configure the router as multi-VCC, these VCCs will
share your modem bandwidth. Please be careful with your application