Olicom BT202BIL01 - Manual

BT202BIL01 Guideline
Bluetooth Access Point with Broadband Router
Quick Start Guide
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against radio interference in a
commercial environment. This equipment can generate, use and radiate radio
frequency energy and, if not installed and used in accordance with the
instructions in this manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause interference, in which case the user, at his own expense, will be
required to take whatever measures are necessary to correct the interference.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55022/A1 Class B, and EN 50082-1. This meets the essential
protection requirements of the European Council Directive 89/336/EEC on the
approximation of the laws of the member states relation to electromagnetic
compatibility.
This Quick Start Guide can help you setup up your PAN router quickly, please
following steps for Bluetooth PAN router setup.
1. Plug-in your ethernet cable in to this router, then plug in the power jack.
Note: The included power adapter is DC 6V/1A, Using wrong type
of power adapter may cause this product damage.