Olympus FMD-250W - Manual (Page 30)

E-30
The warranty period of this unit is one year from the date of purchase. Within this period, Olympus will
repair this unit free of charge. However, this warranty may not cover damage caused by user
mishandling, even if it occurs during the warranty period. If repairs are required after the warranty
period has ended, please contact the dealer from whom you purchased the unit or Olympus.
REPAIR SERVICE
Symptom Possible Cause Solution Ref. Page
The image is not Connections are incorrect. Connect the video cables pg. 13-14
displayed. properly.
A video signal is not input or Turn on the power of the video pg. 17,19
the power is not on. component and play back video.
The image is not clear. The display unit is being Adjust the position with the pg. 15-16
worn improperly. nose pad and frame adjuster.
Video settings Adjust video settings properly pg. 21-22
(CONTRAST, TINT, etc.) with the Multi Control button . pg. 24
are adjusted improperly.
The image disappears About 2-1/2 hours have Rest your eyes. pg. 6
suddenly. elapsed since the power Set the POWER switch to ON pg. 27
was turned on (power when you want to use again.
turns off automatically).
A black, white, red, The LCD screens are manufactured to precise specifications, pg. 10
green or blue dot is but colored dots may be observed.
observed on the This is not a malfunction.
screen.
A striped pattern is This is due to the built-in optical filter which smoothes the pg. 10
observed on the image. image and is not a malfunction.
Audio is not heard. The volume is too low. Adjust the VOLUME. pg. 21,23
The AV cable is not Connect the AV cable. pg. 13-14
connected.
You forgot your — Re-register the password. pg. 26
password.
You want to change — Follow the reset instructions. pg. 24
the language on the
display.
TROUBLESHOOTING