Omron Healthcare HEM-757 - Manual (Page 8)

6
HOW TO APPLY THE ARM CUFF
1. Insert the air plug of the arm cuff
into the air jack of the monitor.
2. The cuff should be assembled
correctly when it is removed from
the box. If it is not, pass the end
of the cuff furthest from the
tubing through the metal D-ring
to form a loop. The smooth cloth
should be on the inside of the
cuff loop.
3. If the cuff is assembled correctly,
the sewn hook material material
will be on the outside of the cuff
loop and the metal D-ring will not
touch your skin.
4. Put your left arm through
the cuff loop. The bottom
of the cuff should be
approximately 1/2"
above the elbow. The
cuff tubing should be
positioned along the
middle of the inside of
your arm as shown.
5. Pull the cuff so that the top and
bottom edges are tightened
evenly around your arm.
Pile Side Material
Sewn Hook Material
D-Ring
Bottom Edge 1/2 Inch
Cuff Tab
Cuff Tube