Omron Healthcare OMRON HEM-705CP - Manual (Page 13)

13
TITLE
HOW TO APPLY THE ARM CUFF
1. If the cuff is assembled correctly, the
hook material will be on the outside of
the cuff loop and the metal D-ring will
not touch your skin.
2. If the cuff is not assembled, pass
the end of the cuff furthest from
the tubing through the metal D-ring
to form a loop. The smooth cloth
should be on the inside of the cuff loop.
3. Sit in a chair with your feet flat on the
floor and place your arm on a table
so that the cuff is at the same level
as your heart.
4. Put your arm through the cuff
loop. The bottom of the cuff should
be approximately 1/2" above
the elbow. The Green Marker
on the cuff should lie over the
brachial artery on the inside
of the arm. Tube should
run down center of arm
approximately even
with middle finger.
SYSTOLIC
DIASTOLIC PULS
AU
MODEL H
Pile Side Material
Sewn Hook Material
D-Ring
Bottom Edge 1/2 Inch
Green Marker
Cuff Tube