beautypg.com

Oricom TP1100 User Manual

Page 8

background image

Wall Mounting

14

Dialling stored numbers

Dialling stored numbers

1. Lift the handset and wait for the dial tone.
2. Press appropriate button M1, M2, ..., M12, the stored

number will be dialled automatically. For easy reference
to your stored phone numbers use index located near

the memory buttons on your phone.

Wall Mounting

To wall-mount your telephone follow these steps:

Step 1: Slide out the clip, turn and slide back into the wall
mounting position (located in the base unit, just below the
hook switch). This will ensure that the handset stays firmly
in position when on the wall.

13

Step 2: Remove the desk stand on the base of the phone
(see the diagram below).

Step 3: Drill 2 holes in the wall 80mm apart, insert wall plugs
and wall mounting screws (not supplied). The screws should
protrude from the wall by 6-7 mm.

Step 4: Install the line cord into the back of the phone and
plug the other end into the telephone wall socket.

Step 5: Place the phone onto the screw-heads and slide
down to secure.

Step 1

Step 2

Step 2

Screw
head

7 mm

80 mm

W

all mounting

80 mm

Wall