Oricom TP1100 User Manual

Page 4

Setting up your Oricom TP1100

Connecting the telephone

1. Connect the handset curly cord to the phone base

and handset.

2. Locate the battery compartment on the base of the phone.

Using your fingernail unclip the battery door.

3. Insert four AAA 1.5V alkaline batteries (supplied) in the

battery compartment, observing the correct polarity.

NOTE:-Batteries must be installed otherwise the ringer

amplification will not work.

4. Replace the battery door.
5. Connect the telephone line cord.
6. Connect the telephone plug to the wall socket.

Connecting the telephone

Telephone socket

Memory
index card

Battery
compartment

Wall mounting
screw holes

Handset curly cord

WARNING: Before installing or removing batteries,
make sure the telephone is NOT connected to the
telephone socket.

Screw