Connecting the av receiver —continued, Speaker configuration, Using dipole speakers – Onkyo TX-SR876 User Manual
Page 24: Connecting a powered subwoofer, Attaching the speaker labels

24
Speaker Configuration
For 7.1-channel surround-sound playback, you need 
seven speakers and a powered subwoofer. 
The following table shows which channels you should 
use based on the number of speakers you have. 
* If you’re using only one surround back speaker, connect it to the
SURR BACK L terminals.
No matter how many speakers you use, a powered sub-
woofer is recommended for a powerful and solid bass.
To get the best from your surround-sound system, you 
must set the speaker settings. You can do this automati-
cally (see page 64) or manually (see page 95).
Using Dipole Speakers
You can use dipole speakers for the surround left and 
right and surround back left and right speakers. Dipole 
speakers output the same sound in two directions.
Dipole speakers typically have an arrow printed on them 
to indicate how they should be positioned. The surround 
left and right dipole speakers should be positioned so that 
their arrows point toward your TV or screen, while the sur-
round back left and right dipolar speakers should be posi-
tioned so that their arrows point toward each other, as 
shown.
Connecting a Powered Subwoofer
Using a suitable cable, connect the AV receiver’s PRE 
OUT: SUBWOOFER to the input on your powered sub-
woofer. If your subwoofer is unpowered and you’re 
using an external amplifier, connect the PRE OUT: 
SUBWOOFER to the amp’s input.
Attaching the Speaker Labels
The AV receiver’s positive (+) speaker terminals are 
color-coded for ease of identification. (The negative (–) 
speaker terminals are all black.)
The supplied speaker labels are also color-coded and you 
should attach them to the positive (+) side of each 
speaker cable in accordance with the above table. All 
you need to do then is to match the color of each label to 
the corresponding speaker terminal.
For North American model
• If you are using banana plugs, tighten the speaker ter-
minal before inserting the banana plug.
• Do not insert the speaker code directly into the center
hole of the speaker terminal.
Number of speakers:
2
3
4
5
6
7
Front left
✓
✓
✓
✓
✓
✓
Front right
✓
✓
✓
✓
✓
✓
Center
✓
✓
✓
✓
Surround left
✓
✓
✓
✓
Surround right
✓
✓
✓
✓
Surround back*
✓
Surround back left
✓
Surround back right
✓
2
1
3
4
2
1
3
4
5
6
7
8
5
7
8
6
TV/screen
TV/screen
1. Subwoofer
2. Front left speaker
3. Center speaker
4. Front right speaker
5. Surround left speaker
6. Surround right speaker
7. Surround back left 
speaker
8. Surround back right
speaker
Dipole speakers
Normal speakers
Speaker terminal
Color
Front left, Zone 2 left
White
Front right, Zone 2 right
Red
Center
Green
Surround left
Blue
Surround right
Gray
Surround back left
Brown
Surround back right
Tan
LINE INPUT
LINE INPUT
Powered
subwoofer
LINE INPUT
LINE INPUT
