Sylvania 6719DF - Manual (Page 37)

– 37 – EN
SEARCH FUNCTION
TRACK SEARCH
There are three ways to begin playback on an Audio
CD at a specific track.
Using the Number buttons
1 Press the Number buttons to enter the
desired track number.
¡ Playback will start at the selected track.
¡ For single digit tracks (1-9), press a single number
(eg. track 3, press [3]).
¡ To play track 26, press [+10], [2], [6].
Using [SEARCH MODE]
1 Press [SEARCH MODE].
¡ The track search display appears.
2 Within 30 seconds, select the desired track
number using the Number buttons.
¡ For single digits press [0] first, if the total track of
the disc is 10 tracks or more.
¡ Playback will start at the selected track.
Using [H / G ]
During playback, press [G] to move the next track.
Press it repeatedly to skip subsequent tracks. Press
[H ] to go back to beginning of the current track.
Press it repeatedly to go to the previous tracks.
¡ If [H / G] is pressed while the playback is
paused, the playback will be paused again after
skipping to the next track.
NOTE:
¡ [H / G ] are not operative when playback is
stopped.
CD
TITLE / CHAPTER SEARCH
1 Press [SEARCH MODE] once for the
Chapter search, twice for the Title search
during playback.
2 Enter the desired chapter/title number using
the Number buttons.
¡ Playback will start at the selected chapter or title.
¡ Press [CLEAR] to erase the incorrect input.
¡ For single digits press [0] first, if the total number of
chapter or title of the disc is 10 or more.
DVD-V
_/2
TIME SEARCH
1 During playback, press [SEARCH MODE]
three times (CD: twice) to display the Time
Search on the TV screen.
2 Within 30 seconds, enter a desired disc
time using the Number buttons.
¡ Playback will start at the specified time.
¡ Press [CLEAR] to erase the incorrect input.
¡ When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0 - : - -”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
CD DVD-V
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a disc.
1 Press [SEARCH MODE] four times
(CD: three times) during playback.
¡ The display screen and Markers will appear on the
TV screen.
2 Press [s / B] to select 1, 2, 3, 4, 5, 6, 7, 8, 9,
or 10 and ensure that “- - - - : - - : - -”
appears in the display.
3 When you reach the desired point, press
[ENTER].
¡ The Title or Track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press
[SEARCH MODE] four times (CD: three
times) during playback and press [s / B]
to choose the desired marker, then press
[ENTER].
NOTES:
¡ Operations which erase all Markers:
– Opening the disc tray.
– Turning off the power.
– Pressing [SELECT].
– Selecting “AC” at step 2 and pressing [ENTER].
¡ To clear a marker:
– Press [ s / B ] to select a cursor on to the marker
number and press [CLEAR].
¡ You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to exit.
CD DVD-V