Sylvania 6719DF - Manual (Page 25)

- 25 - EN - 25 - EN - 25 - EN - 25 - EN
SEARCH
Make sure ...
• The unit must be turned on.
• Insert a tape.
This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
• Zero Return WILL NOT work on a blank tape or
a blank portion of a tape.
1
Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point at which you want to review.
2
Reset the counter to 0:00:00
Press [C.RESET] repeatedly.
3
Begin recording or playback
Press [RECORD] or [PLAY O].
Press [STOP C] when recording or playback is com-
pleted.
4
To activate “ZERO RETURN”
Press [SETUP].
Press [K / L] to point to “ZERO
RETURN”, then press [ENTER].
The unit will begin rewinding and
the counter will appear on the TV
screen.
The tape will automatically stop when the counter
returns to 0:00:00 (approx.).
TV/VCR
ZERO RETURN
The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTE:
• Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
TV/VCR
TIME SEARCH
In the example below: To watch a program before/
after 2 hour 50 minutes from the present position, in
either direction.
1
Select “TIME SEARCH”
Press [SETUP].
Press [K / L] to point to “TIME
SEARCH”, then press [ENTER].
2
Enter your desired time
Press [K / L] until your desired time
appears. (Example: “2:50” stands for
2 hours 50 minutes)
If you wish to cancel the Time
Search at this point, press
[SETUP].
3
Begin Time Search
By pressing [ s / B ], the unit will rewind or fast for-
ward to the specified point.
The time counts down during the search. When the
display shows “0:00”, the tape will start playback
automatically.
TO CANCEL DURING TIME SEARCH
Press [ C A STOP/EJECT] on the unit or
[STOP C]. This will delete the selected time.
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
INDEX SEARCH
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
B TIME SEARCH
INDEX SEARCH
TIME SEARCH
2 : 50
PICTURE SEARCH
This feature is very useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1
Start Picture Search
During playback, press [D] or [E] to view at a
high speed (in forward/reverse).
2
Change searching speed
Press [D] or [E] again to view at super high
speed (in the LP/SLP modes only).
TV/VCR
NOTE:
• Tapes recorded in the SP or LP mode will normally
display a noise bar on the TV screen and the pic-
ture may revert to Black and White.
3 Return to normal speed
Press [PLAY O].