Outback Power Systems Excel 100 - Manual (Page 9)

9
E. Assembly
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Philips/cross-point screwdriver, adjustable spanner or metric spanner set
This barbecue requires two people for assembly. Please remove all packaging materials from all
individual parts before assembling. Please lay out all nuts and bolts and check lengths before
assembling. Whilst every care is taken during the manufacture of this product, care must be taken
during the assembly in case sharp edges are present.
2 Excel 100 Excel 200 Excel 300
C6
C7
Attach the Long Leg
Front (C7) and Long
Leg Rear (C8) to the
Leg End Loop (C6).
The legs are a push fit
onto the Leg End Loop.
In case of difficulty, they
may need tapping with
a soft faced mallet.
Take care not to
damage the parts.
C1
C2
C3
Attach the Short Leg
Front (C1) and Short
Leg Rear (C2) to the
Gas Cylinder Holder
(C3). The legs are a
push fit onto the Gas
Cylinder Holder. In case
of difficulty; they may
need tapping with a soft
faced mallet. Take care
not to damage the
parts.
Excel 100 Excel 200 Excel 300 1