Outback Power Systems Excel 100 - Manual (Page 23)

23
L. Troubleshooting
Problem Possible Cause Solution
Burners will not light using
the ignition system LP gas bottle is empty Replace with full bottle
Faulty regulator Have regulator checked or replaced
Obstructions in burners Clean burners
Obstructions in gas jets or gas hose Clean jets and gas hose
Electrode wire is loose or disconnected
on electrode or ignition unit
Reconnect wire
Electrode or wire is damaged Change electrode and wire
Faulty pushbutton ignitor Change ignitor
Burner will not light with a
match LP gas bottle is empty Replace with full bottle
Faulty regulator Have regulator checked or replaced
Obstructions in burners Clean burners
Obstructions in gas jets or gas hose Clean jets and gas hose
Low flame or flashback
(fire in burner tube— a
hissing or roaring noise
may be heard) LP gas bottle too small Use larger bottle
Obstructions in burners Clean burners
Obstructions in gas jets or gas hose Clean jets and gas hose
Windy conditions Use BBQ in a more sheltered position
Gas valve knob difficult to
turn Gas valve jammed Replace gas valve
For reference and correspondence,
record your serial number here.
(See sticker on side of barbecue body.)
Serial No.
__________________
This number may be required when
ordering spare parts or accessories. A
part reference number may also be
required where applicable.