Omega DP26-TC - Manual (Page 59)

MENU ITEM FACTORY PRESET VALUES
51
SECTION 14. FACTORY PRESET VALUES
Table 14-1. Factory Preset Values
INPT Input Type: K.TC (Type K T/C)
DEC.P Decimal Point Position: FFF.F
RD.CF Reading Configuration:
R.1=F (Fahrenheit)
R.2=D (Shows deviation in “RUN” mode)
S1.CF Setpoint 1 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched)
S.3=0 (Setpoint 1 assigned to T1 - T2)
S2.CF Setpoint 2 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched)
S.3=0 (Setpoint 2 assigned to T1 - T2)
S1.DB Setpoint 1 Deadband: 3.0
S2.DB Setpoint 2 Deadband: 3.0
OT.CF Output Configuration:
O.1=E (Analog output is enabled)
O.2=C (Analog output is current)
O.3=A (Analog output follows the display value)
OUT Analog Output Routing: T1 - T2
OT.S.O Output Scale and Offset:
0-1000 = 4-20 mA dc
C.OF.1 Cold Junction Offset for T1: 000.0
Cold Junction Offset for T2: 000.0
SP1 Setpoint 1 Value: 000.0
SP2 Setpoint 2 Value: 000.0