Omega DP26-TC - Manual (Page 23)

3.3 PANEL MOUNTING
Figure 3-3 Meter - Exploded VIew
1. Cut a hole in your
panel, as shown in
Figure 3-3. For
specific
dimensions refer to
Figure 3-4.
2. Insert the meter
into the hole.
Be sure the front
bezel gasket is
flush to the panel.
3. Slide on mounting
bracket to secure.
4. Proceed to Section
3.4 to connect your
sensor input and
main power.
15
"NEW" STYLE
MOUNTING
BRACKET
FRONT BEZEL
CASE
REAR COVER
(REMOVED)
PANEL
CUT-OUT
"OLDER" STYLE
MOUNTING
BRACKET 2 PCS
GASKET
PRODUCT
LABEL
CONNECTOR
LABEL
Figure 3-4 Panel Cut-Out